咨询热线

13761090949

当前位置:首页   >  产品中心  >  二维材料  >  二维材料薄膜  >  机械剥离单层二硫化钼薄膜

机械剥离单层二硫化钼薄膜

简要描述:Monolayer molybdenum disulfide (1H-MoS₂) flakes have been exfoliated from bulk molybdenum disulfide (2H-MoS₂) onto 90nm thermal oxide and measures from 5 micron up to 40 micron in size.

  • 产品型号:
  • 厂商性质:生产厂家
  • 更新时间:2018-07-04
  • 访  问  量:583

详细介绍

Monolayer molybdenum disulfide (1H-MoS₂) flakes have been exfoliated from bulk molybdenum disulfide (2H-MoS₂) onto 90nm thermal oxide and measures from 5 micron up to 40 micron in size. Each sample contains at least one single-layer MoS₂ and is easy to find with the given x and y coordinates. Optical images and preliminary tests come with the product. Typically, single-layer MoS₂ show strong PL at 1.85-1.88 eV with 0.04 to 0.1eV FWHM, and the Raman peaks are located at 386cm-1 (E2g in-plane mode) and 404 cm-1 (A1g out-of-plane mode). Characterization Raman spectroscopy: Raman spectroscopy is data is taken on every single-layer flakes. Typically, flakes show two prominent Raman peaks at 386cm-1 (E2g- in plane-) and 404cm-1 (A1g out-of-plane) and the FWHM (full-width-at-half-maximum) is less than 5cm-1. Photoluminescence (PL): In the single layer form, molybdenum disulfide possesses direct band-gap at 1.85eV (670nm). PL measurements show strong PL peak located at 1.85eV (670nm) with 0.04-0.10 eV PL FWHM. Optical Microscope images: Each sample is inspected under the optical microscope and x-y coordinates are recorded. Contact us for more information

Possible applications:
Electronics
Sensors - detectors
Optics
STM – AFM applications
Molecular detection – binding
Ultra-low friction studies
Materials science and semiconductor research

产品咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7

联系我们

上海巨纳科技有限公司 公司地址:上海市虹口区宝山路778号海伦国际大厦5楼   技术支持:化工仪器网
  • 联系人:袁文军
  • QQ:494474517
  • 公司座机:86-021-56830191
  • 邮箱:yuanwenjun@sunano.com.cn

扫一扫 更多精彩

微信二维码

网站二维码